ReUseIt Project: Wreath Hanger

Project Level: Easy

Time: 10 minutes

Materials:

Supplies:

Tools:

Straightened Metal Hanger

None needed

Pliers with wire cutter

Follow Hanger basics instruction to start with a trimmed and straightened hanger.

Bend one end about 2”. The thickness of most doors are around 1 ¼” but measure the door thickness you will be hanging your wreath on.Make the next bend this measurement and check it for a good fit.

Hang it on the door and measure down the wire to the point where you want the wreath to hang and mark it.From that mark, measure and mark at 2 ½” and then another 2” from that mark.

Cut off the wire at the last

 mark. Bend the wire at the first mark in the opposite direction from the other end (outward from the door).Then bend upward from the last mark.

Put your wreath hanger on the door to check it.

And your done!